McGraw Hill Test Builder Alternative for Exams Outside Connect

2026/11/20

Click to upload or drag and drop

PDF, DOCX, PPTX, TXT, JPG, JPEG, PNG, HEIC, ODP, ODT, BMP, or TIFF

Up to 10 files at once, 50 MB each, merged into one quiz within the demo page limit

Please wait, your quiz is being created...

Uploading...

A McGraw Hill Test Builder alternative is worth setting up when your exams no longer come from a McGraw Hill bank. Test Builder is the exam tool inside Connect, so it works from the question banks of your adopted textbook and lives inside your Connect course. If your department switched books, your adoption ended, or most of your questions come from your own lectures and readings, you need a tool that reads your files instead. PDFQuiz, for example, copies an existing exam from a PDF or Word file with its answers, writes new questions from a chapter, and prints the test with a key or exports it to Canvas, Blackboard or Moodle.

What McGraw Hill Test Builder does well

Start with the fair part. According to McGraw Hill's Test Builder user guide and its step by step overview, you launch Test Builder from the Manage Assignment page of your Connect section, pick a chapter as the source, filter its questions, add them to a test and set the points for each item. The finished exam can be printed or administered through your learning management system, and McGraw Hill publishes how to videos for exporting to an LMS as QTI and to Microsoft Word.

For an instructor who teaches a McGraw Hill title every term and builds exams from its bank, that is a good workflow. The questions are tagged to the book, the export to an LMS is built in, and there is nothing to install. If that describes your course, keep using it.

Where Test Builder stops working for you

The same overview lists a few rules that matter once your situation changes:

  • It sits inside Connect. You reach Test Builder from your Connect section dashboard. No Connect course, no Test Builder.
  • Imports are narrow. McGraw Hill states that an imported test must be a zip file downloaded from Test Builder with the same ISBN. A Word exam you wrote yourself, or a test built for a different book, does not come in that way.
  • Output files expire. The guide says a generated test expires after 30 days and can be resubmitted with the Regenerate link. Fine while you have access, awkward if you are about to lose it.
  • The sources are chapters of the book. Your own case studies, lab handouts and guest lectures are not in the bank, so those items are typed by hand.

None of this is a flaw for a loyal adopter. It becomes a problem the semester your department moves to another publisher or an open textbook, or when an adjunct teaches the same course at two colleges with two different books.

McGraw Hill Test Builder alternatives compared

There are four realistic routes, counting staying put. The table compares them on the jobs instructors actually have when they leave a publisher bank.

RouteReads your PDF or Word examsWrites new items from a chapterLMS exportBest for
Stay in Test BuilderNo, only Test Builder zips with the same ISBNNo, picks from the publisher bankYes, QTI and Word per McGraw HillInstructors staying on the same McGraw Hill title
LMS quiz editor (Canvas, Moodle)No, you type or paste each itemNoNative, it is the LMSShort quizzes written from scratch
Another publisher's generator (Pearson TestGen, Cengage Cognero)No, built around that publisher's banksNoYesDepartments adopting that publisher's book
PDFQuizYes, copy mode keeps wording and answersYes, from any uploaded materialCanvas QTI zip, QTI 2.1, Moodle GIFT (choice questions)Changing books, open textbooks, your own materials

The honest summary: if you are moving to another publisher, that publisher's generator is the natural next home, and our pages on the Pearson TestGen alternative and the Cognero alternative for teachers explain where each one stops. If you are moving to an open textbook or to your own materials, no publisher tool helps, and a file based tool is the one that saves time.

Worked example with a 60 question anatomy and physiology exam

An instructor teaches Anatomy and Physiology I, a prerequisite for the nursing program. For three years the course used a McGraw Hill text, and the unit 2 exam on tissues and the integumentary system has 60 questions: 41 picked from the Test Builder bank and edited over several terms, 12 the instructor wrote about lab specimens, and 7 short answer items. Next fall the department adopts the free OpenStax Anatomy and Physiology 2e textbook, and the Connect course goes away with the old adoption.

The split below shows what happens to each group. Minutes are our estimates for one instructor, not measured averages.

Question groupCountWhat to doEstimated time
Bank items that still match the new book33Export from Test Builder to Word now, copy into PDFQuizAbout 12 minutes to check the copy
Bank items that cite old figures or page numbers8Drop, generate 8 replacements from the OpenStax chaptersAbout 10 minutes to review drafts
Instructor written lab items12Copy, they are the instructor's own workAbout 5 minutes
Short answer items7Copy, keep on the printed exam and in PDFQuizAbout 3 minutes
Makeup form for students who miss the exam60Generate a new set from the same chapters and lab handoutAbout 25 minutes to review
Result120Two exam forms with keys, no Connect course neededUnder an hour of review

Two details decide whether this goes smoothly. First, timing. Do the Word export while the Connect course still exists, because once the adoption ends you lose the route to those edited items, and generated files expire after 30 days anyway. Second, figures. The items that went stale were the ones pointing at a labeled diagram in the old book. For the replacements, the instructor uploaded the OpenStax chapter, which includes its own figures, and asked for questions on the concepts rather than on a specific image.

The short answer items deserve a note. They copy into PDFQuiz and print on the paper exam with the key, but the Canvas QTI and Moodle GIFT files carry only the multiple choice and true or false items. If the exam runs in the LMS, the 7 short answer questions are added there by hand or graded on paper.

How to move your exams out of Test Builder

The order matters, so here it is as a checklist.

  1. List the exams you still use. Usually that is the unit exams, the final and a few quizzes, not everything you ever built.
  2. Export each one to Microsoft Word from Test Builder while your Connect section is active, with the answer key included. Save the files off your work laptop as well.
  3. Upload each file to PDFQuiz with Copy existing quiz switched on. The wording, options and correct answers come across as editable questions. Spot check ten items against the original.
  4. Upload the new textbook chapter or your slides with copy mode off to draft items for content the old bank never covered, and for a makeup form.
  5. Print or export. Download the exam and its key as PDF or Word, or export a Canvas QTI zip, a QTI 2.1 package for Blackboard and Brightspace, or a Moodle GIFT file. The QTI converter page explains which file goes where.

If the department wants a shared pool that several sections draw from, the test bank generator turns a whole open textbook into a bank you can pull exams from.

Is a file based test generator right for a K-12 teacher too?

Yes, and the reasons are similar. K-12 teachers rarely have a Connect course, but they do have folders of Word tests and PDFs. Many of them use a simple typed test maker such as EasyTestMaker, which formats paper tests well but needs every question entered by hand. Our EasyTestMaker alternative page walks through a 30 question biology test and a makeup form built from files that already existed, with a side by side table of what each tool does.

What PDFQuiz costs and what each plan unlocks

PDFQuiz is a paid subscription for one instructor. Copying existing questions and downloading the exam with an answer key as PDF or Word are on the Plus plan. The Canvas QTI, QTI 2.1 and Moodle GIFT exports, question pools and time limits are on Pro. Prices are on the pricing page, and you can run the demo on one of your own exams before you pay.

A sensible test before committing a course: take one Test Builder exam you know well, export it to Word, copy it into PDFQuiz, generate a makeup form from the chapter, and print both with keys. If the result is something you would hand to students after a light edit, the rest of the course will go the same way. Start with the upload box on the PDF to exam page.